‧5位数红色LED显示器
‧具有飞梭旋钮及按键式双模调整转速
‧可使用于动态摄影
‧铝金属外壳坚固耐用
‧适用于：
动态视觉暂留摄影
设备转速确认
自动化系统，高速惯性动作位置确认
‧连续运转限制(停机10分钟后可继续使用)
小于2000RPM：2小时
2000-3600RPM：1小时
3601-8000RPM：30分钟
大于8000RPM：10分钟
1.14mm红色LED， 5位数显示
2.使用氙气高亮度白色闪光灯
3.闪频/转速值设定
40～35000 RPM/FPM ±(0.05%+1D)
低于1000RPM时，分辨率：0.1RPM
4.可外接同步触发
5.请指定电源电压：
AC110V或220V或230V 50/60Hz
6.倍数×2、÷2设定功能
‧5-digit red LED display
‧With shuttle knob and push-button dual-mode speed adjustment
‧Can be used for motion photography
‧Aluminum metal housing is sturdy and durable
‧Suitable for:
Dynamic visual lingering photography
Confirm the speed of the equipment
Automatic system, high-speed inertial action position confirmation
‧Continuous operation limit (can be used after 10 minutes of shutdown)
Less than 2000 RPM: 2 hours
2000-3600RPM: 1 hour
3601-8000RPM: 30 minutes
>8000 RPM: 10 minutes
1.14mm red LED, 5-digit display
2. Use a xenon high-brightness white flash
3. Flash/speed value setting
40～35000 RPM/FPM ±(0.05%+1D)
Below 1000RPM, resolution: 0.1RPM
4. It can be triggered by external synchronization
5. Please specify the power supply voltage:
AC110V or 220V or 230V 50/60Hz
6. Multiple×2, ÷2 setting function
