■ 高精度数字万用表大大改进了测量功能、诊断功能、分辨率和精度，能够更多地解决工厂自动化设备、配电和机电等设备的故障
■ 具有更强解决问题的能力，更加便捷，更好的安全保护措施
■ 4位9999数据点，3-5/6位6000数据点
■ 大屏幕数码和背光显示，增强了可读性
■ 双数据显示，可同时显示电压或电流及频率，电压或电流的AC成分和DC成分等
■ 41段快速条形图显示，用于快速变化或不稳定信号显示的模拟指针
■ 测量高达1000V交流和直流电压信号，最大精度0.06%
■ 最佳交直流电压测量最高分辨率达到0.01mV
■ 真有效值测量，可准确进行非线性信号测量，交直流电流最小分辨率0.1uA
■ 具有非接触电压检测功能，运用接触法与非接触法探测带电导体电流激活/停用状态
■ 通过柔性电流钳头与数字表相结合，可测量高达3000A交流电流
■ 可以选配多种钳形探头用于测量交直流电流和微/漏电流(选件)
■ 频率测量(多个灵敏度可选)，大容量电容测量（仅AC正弦波）
■ 可测高达1MHz逻辑频率，以及百分比表示的占空比
■ 内置温度计，无需携带更多工具选配K型热电偶温度传感器可测温度：-50℃—1000℃测量温度时需要软件支持
■ 电导、阻抗、通断和二极管测试
■ 通断蜂鸣音提示
■ 尖峰捕获保持功能，可以记录瞬态信号
■ 数据锁定用于观察和记录测量数据
■ 量程锁定可以固定量程
■ 自动量程的相对值测量
■ 25mF的电容测量量程，用于器件和马达电容的测量
■ 具有防止电流端子误插入功能,当使用电流测量以外的功能时, mA、uA或A测定端子内插入表笔线时会显示InErr,同时蜂鸣器报警
■ 独有的镀金表笔，防腐、防接触不良，提高测量的精度
■ 标配可吸附在金属表面的磁吊带和防止跌落等冲击的弹性保护套
■ 软件支持8个通道的数据采集分析功能
■ 光电USB接口（选配）连接PC，通过软件分析测量数据，操作界面实时显示图形，使您能轻松检查测量数值的变化
■ 数据读取可设定间隔单位为秒，最短读取间隔为0.2-0.3秒
■ 多窗口界面，各通道分散图显示
■ 允许预先设定自动读取
■ 为保存测定数据, 可连接电脑将数据储存到硬盘,也可连接到安卓终端记录到内存,方便统计和分析数据.
■ 自动省电模式（30分钟）可取消，延长了电池寿命
■ 电池寿命：直流电压量程内约60小时（锰电池）
■ 抽样率：5次/秒、条形图60次/秒
■ 安全规格：按照欧盟标准测试，完全满足IEC61010-1,IEC61010-31, CAT.III600V/（最大）CAT.II1000V(最大)EN61326-1的标准要求
■ 频带宽度：V：40Hz—3KHz, 3KHz—20KHz(99.99V以下)A：40Hz—1KHz
■ Significantly enhanced measurement capabilities, diagnostic functions, resolution, and accuracy for troubleshooting factory automation equipment, power distribution systems, and electromechanical devices.
■ Improved problem-solving efficiency, user-friendly operation, and advanced safety protections.
■ Display:
4-digit 9999 count display; 3-5/6-digit 6000 count display.
Large backlit screen for enhanced readability.
Dual display for simultaneous readings (e.g., voltage/current with frequency, AC/DC components).
41-segment fast bar graph for analog-like visualization of rapidly changing or unstable signals.
■ Measurement Capabilities:
Voltage: AC/DC up to 1000V with 0.06% maximum accuracy; best resolution of 0.01mV.
Current: True RMS for accurate nonlinear signal measurement; AC/DC current down to 0.1µA resolution.
Non-contact voltage detection for identifying live/dead conductors.
Flexible current clamp supports AC current up to 3000A (optional clamps for DC/micro/leakage currents).
Frequency: Adjustable sensitivity; logic frequency up to 1MHz; duty cycle displayed as percentage.
Capacitance: Up to 25mF for component and motor testing (AC sine wave only).
Temperature: Built-in thermometer with optional K-type thermocouple (-50°C to 1000°C; requires software).
Additional tests: Conductance, impedance, continuity, diode.
■ Safety & Usability:
Input Error Alert: Audible/visual warning if test leads are inserted into incorrect terminals (mA/µA/A).
Gold-plated test leads for corrosion resistance and reliable contact.
Magnetic hanger and shock-absorbing protective case included.
Compliance with IEC 61010-1, IEC 61010-31, CAT III 600V / CAT II 1000V, and EN 61326-1 safety standards.
■ Data & Connectivity:
PC Software: 8-channel data acquisition and analysis; real-time graphical interface.
Optical USB interface (optional) for PC/Android data logging (storage to HDD or device memory).
Configurable sampling intervals (minimum 0.2–0.3 seconds).
Multi-window display for multi-channel scatter plots.
Pre-set auto-read and data hold functions.
■ Power & Performance:
Auto power-off (30 minutes, disable optional); ~60 hours battery life (manganese cells).
Sampling rate: 5 readings/sec; bar graph updates at 60 readings/sec.
Frequency bandwidth:
Voltage: 40Hz–3kHz (3kHz–20kHz for ≤99.99V).
Current: 40Hz–1kHz.
