■ 4位9999数据点,3-5/6位6000数据点
■ 大屏幕数码显示, 增强了可读性
■ 双数据显示，可同时显示电压或电流及频率，电压或电流的AC 成份和DC成份等
■ 41段快速条形图显示适用于快速变化或不稳定信号显示的模拟指针
■ 测量高达1000V交流和直流信号，最大精度0.06%
■ 交直流电压测量最小分辨率达到0.01mV。交直流电流最小分辨率0.1uA
■ 通过柔性电流钳头与数字表相结合，可测量高达3000A交流电流
■ 可选配多种钳形探头用于测量交直流电流和微/漏电流( 选件)
■ 频率测量( 多个灵敏度可选)，大容量电容测量（仅AC正弦波）
■ 可测高达1MHz 逻辑频率，以及百分比表示的占空比
■ 电导、阻抗、通断和二极管测试
■ 通断蜂鸣音提示
■ 数据锁定用于观察和记录测量数据
■ 量程锁定可以固定量程
■ 自动量程的相对值测量
■ 25mF的电容测量量程，用于器件和马达电容的测量
■ 具有防止电流端子误插入功能, 当使用电流测量以外的功能时,mA/uA/A测定端子插入表笔线时会显示InErr, 同时蜂鸣器报警
■ 标配镀金表笔，防腐、防接触不良，提高测量的精度
■标配可吸附在金属表面的磁吊带和防止跌落等冲击的弹性保护套
■ 软件支持8个通道的数据采集分析功能
■ 光电USB接口（选配）连接PC，通过软件分析测量数据，操作界面实时显示图形，能轻松记录测量数值的变化
■ 数据读取可设定间隔为秒，最短读取间隔为0.2-0.3 秒
■ 多窗口界面，各通道分散图显示
■ 允许预先设定自动读取
■ 为保存数据，可连接电脑将数据储存到硬盘，也可连接到安卓
■ 终端记录到内存，方便统计和分析数据
■ 自动省电模式（30 分钟）可取消，延长了电池寿命
■ 电池寿命：直流电压量程内约60 小时（锰电池）
■ 抽样率：5次/ 秒、条形图60/秒
■ 安全规格：按照欧盟标准测试，完全满足I EC61010-1,IEC61010-31, CAT.III600V/最大）CAT.II1000V(最大)EN61326-1的标准要求
■ 频带宽度：V：40Hz-3KHz，3KHz-20KHz（99.99V以下）
A：40Hz-1KHz
■ Display:
4-digit 9999 count / 3-5/6-digit 6000 count display.
Large digital screen for enhanced readability.
Dual display: Simultaneously shows voltage/current with frequency, or AC/DC components.
41-segment fast bar graph for visualizing rapidly changing or unstable signals (analog-like indicator).
■ Measurement Capabilities:
Voltage/Current:
Measures up to 1000V AC/DC with 0.06% maximum accuracy.
AC/DC voltage resolution down to 0.01mV; AC/DC current resolution down to 0.1µA.
Current Clamp Integration:
Flexible clamp for AC current up to 3000A (optional clamps for AC/DC, micro/leakage currents).
Frequency & Duty Cycle:
Measures logic frequencies up to 1MHz; duty cycle displayed as a percentage.
Capacitance:
25mF range for component and motor capacitor testing (AC sine wave only).
Additional Tests: Conductance, impedance, continuity, diode.
■ Safety & Usability:
Input Error Protection: Audible/visual alarm ("InErr") if test leads are inserted into mA/µA/A terminals during non-current measurements.
Gold-plated test leads (anti-corrosion, stable contact).
Magnetic hanger and shock-absorbing protective case included.
Complies with IEC 61010-1, IEC 61010-31, CAT III 600V (max), CAT II 1000V (max), EN 61326-1.
■ Data Features:
Data Hold & Range Lock: Freeze readings or lock measurement ranges.
Relative Value Mode: Auto-ranging with relative measurements.
8-Channel Data Analysis Software:
Optical USB interface (optional) for PC connectivity.
Real-time graphing, multi-window scatter plots.
Configurable sampling intervals (minimum 0.2–0.3 seconds).
Save data to PC hard drive or Android device memory.
■ Power & Performance:
Auto power-saving mode (30 minutes, disable optional).
Battery life: ~60 hours in DC voltage mode (manganese batteries).
Sampling rate: 5 readings/sec; bar graph updates at 60 readings/sec.
Frequency Bandwidth:
Voltage: 40Hz–3kHz (up to 20kHz for ≤99.99V).
Current: 40Hz–1kHz.
■ Alerts & Indicators:
Continuity buzzer.
Pre-set auto-read and data logging.
